Available in three different types of sensor technology (vibration, ultrasonic, and buoyancy) with specifiable dimensions, the Smart Trak can be custom-designed for any use. The buoyancy sensor (AV) is great for clean water or water-like chemical media that is non-coating and non-scaling. The vibration sensor (AZ) is typically used in wastewater media with light coating or foaming characteristics. The ultrasonic sensor (AU) is classified as intrinsically safe, for chemical, solvent, hydrocarbon, and lightweight oil media.
|
-Specifications-
| Length: |
8" to 10' (20cm to 3m) |
Process temp: |
F: -40° to 194°
C: -40° to 90° |
| Switch points: |
2 (field adjustable) |
Electronics temp: |
F: -40° to 140°
C: -40° to 90° |
| Orientation: |
± 30° vertical |
Pressure: |
Atmospheric |
| Supply voltage: |
120/240 VAC @ 50-60 Hz |
Wetted material: |
PP (20% glass fill) |
| Strobe type: |
431_: N/a
432_: Xenon tube |
Process mount: |
2" NPT (2" G) |
| Strobe flash: |
431_: N/a
432_: 1 per second |
Enclosure rating: |
NEMA 4X (IP65) |
| Contact type: |
(1) SPDT relay, latching |
Installed height: |
431_: 5.7" (14.4 cm)
432_: 7.4" (18.8 cm) |
| Contact rating: |
250 VAC @ 10A |
Enclosure material: |
PP, UL94VO |
| Contact latch: |
Selectable ON/OFF |
Conduit entrance: |
Single, 1/2" NPT |
| Contact delay: |
0-60 seconds |
Classification: |
General purpose |
| LED indication: |
Power, relay, and sensor status |
CE compliance: |
EN 50082-2 immunity
EN 55011 emission
EN 61010-1 safety |
|
