|
EchoPod Three-Wire Level Transmitter
|
DX10-00
DX10-01 |
|
The EchoPod DX10 is a three-wire sensor that can replace old analog sensors or multi-point switches with a voltage output signal. It can be flexibly be installed directly into existing hardware/ software, and will save money by eliminating unnecessary parts (like an A-D card) and requiring little maintenance, even in the most corrosive materials.
All EchoPod products are easily configurable using free WebCal software from Flowline (see above links).
|
-Specifications-
Range: |
49.2" (1.25 m) |
Ambient Temp: |
F: -31 to 140
C: -35 to 60 |
Accuracy: |
0.125" (3mm) |
Pressure: |
MWP = 30 PSI |
Resolution: |
0.019" (0.5mm) |
Enclosure: |
Type 6P encapsulated, corrosion resistant & submersible |
Beam width: |
2" (5 cm) |
Enclosure material: |
Polycarbonate |
Dead band: |
2" (5 cm) |
Strain relief material: |
Santoprene |
Supply Voltage: |
24 VDC |
Transducer material: |
PVDF |
Consumption: |
0.5W |
Cable length: |
48" (1.2m) |
Signal outout: |
0-5 V, 0-10 V, 976-2000 Hz |
Cable jacket material: |
Polyurethane |
Frequency: |
Sink Current = 15 mA Nominal |
Process mount: |
1" NPT (1" G) |
Fail-safety: |
Full, empty, or hold last |
Mount gasket: |
Viton |
Configuration: |
WebCal® Software, USB 2.0 |
Classification: |
General purpose |
Temp comp: |
Automatic over range |
Approvals: |
CE, cFMus |
Process Temp: |
F: -20 to 140
C: -7 to 60 |
|
|
|
|
