|
DataSwitch™ Remote Relay Controller
|
LC52-1001 |
|
The DataSwitch™ controller provides level indication with 2 relays (one is configurable on a single set point switch, other is configurable on one or two set points), 1-3 set points and an isolated analog repeater. The DataSwitch enclosure is perfect for field-mount installations, push buttons and an LED display make reading and calibration easy, and a Flowline fail-safe design keeps the package secure with lock-out calibration.
|
-Specifications-
| Supply voltage: |
120/240 VAC @ 50-60 Hz |
Loop power: |
4-20 mA, 24 VDC |
| Consumption: |
5 watts max |
Repeater output: |
4-20 mA, 12-36 VDC |
| Display type: |
LED, 3.5-digit |
Contact type: |
(2) SPDT relays, (one latching) |
| Display units: |
Engineering |
Contact rating: |
250 VAC @ 10A |
| LED bar graph: |
Span and set points |
Contact latch: |
Selectable ON/OFF |
| LED indication: |
Power and relay status |
Contact delay: |
0-60 seconds |
| LED sensor alarm: |
<4 mA = amber
>20 mA = red |
Electronics temp: |
F: -40° to 158°
C: -40° to 70° |
| Calibration: |
Digital, puch button |
Enclosure type: |
35 mm DIN rail |
| Memory: |
Non-volatile |
Enclosure material: |
PP, UL94VO |
| Security: |
Set point lock out |
Classification: |
General purpose |
| Sensor input: |
(1) two or three-wire
4-20 mA transmitter |
CE compliance: |
EN 50082-2 immunity
EN 55011 emission
EN 61010-1 safety |
| Sensor supply: |
28 VDC @ 5 watts |
|
|
|
|
