This general purpose meter reade engineering units with one level transmitter input channel. DataPoint™ is compatible with any Flowline level transmitter, as well as third-party voltage, thermocouple or RTD inputs. An optional PC software, the MeterView PC calibration kit, allows users to easily configure meters and utilize data; it can program or clone meters, save meter profiles, datalog and export data to HTML or TXT file formats for the easiest
The DataPoint is available in three configurations to suit any application: meter only for indication, meter with 2 relays for indication and automation, or the meter with 4-20 mA repeater for signal isolation.
|
-Specifications-
| Display type: |
LED, 4 digit |
Contact rating: |
(LI51) - 750 VA |
| Display units: |
Engineering |
Contatc output: |
(LI51) - Selectable NO/NC |
| Decimal point: |
Floating |
Contact mode: |
(LI51) - Alarm, latched, pump altern., lead-lag |
| Display output: |
0-9999 |
Contact delay: |
0-199 seconds |
| Display height: |
0.56" (1.4 cm) |
Contact fail-safe: |
Programmable |
| User interface: |
Four push buttons |
Contact status: |
LED indication |
| Input channels: |
(1) 4-20 mA / 0-10 VDC |
Operating temp: |
F: -4˚ to 140˚
C: -20˚ to 60˚ |
| Supply voltage: |
90-250 VAC, 50-60 Hz |
Enclosure type: |
1/8 DIN |
| PC-cal interface*: |
RS232 (9-pin db to RJ11) adapter w/cable |
Enclosure rating: |
NEMA 4X (IP65) faceplate |
| PC-cal software*: |
MeterView (Windows®)
|
Enclosure material: |
Polycarbonate |
| Memory: |
Non-volatile |
Enclosure mount: |
Panel mount |
| Sensor supply: |
24 VDC @ 200 mA |
Classification: |
General purpose |
| Repeater output: |
(LI52) - Isolated (requires ext. 12-35 VDC supply) |
UL certificate: |
E160849: 508 |
| Contact type: |
(LI51) - (2) SPDT relays |
CE compliance: |
EN 55011:1998 emissions
EN 61000-6-2:2001 immunity
EN 61010-1:2001 safety |
*requires LI97-1001 MeterView calibration kit
|
